Lockedcog Edit – Six Pack

Kris has been putting out edits pretty regularly these days. He went out with Alex again and grabbed a few quick shots around town. Stay tuned for more as Lockedcog ramps up for their 2.0 release.

“Hoodcellhour” via Lockedcog

Kris posted a little edit a few days back. With about an hour of daylight left he took his Butcher out and tried to hit whatever spots he could find within a few blocks of his apartment. Nothing big or fancy on this one, just a guy, his bike, and a camera phone. Sometimes it’s best to just keep it simple.

[vimeo 45496834 width=”550″]

Phil Arellano and His Buellers

Phil recently threw a pair of Buellers on his bike and has been giving them a  thorough beating. A few months in and he has nothing but great things to say about them. No hops, no bends, and just a single spoke to be tensioned. Be sure to check out Phil’s solo edit below too. You can find our Bueller rims, hubs, and wheels for sale on WS-Outlet.

New Lockedcog Edit

Kris just put out a new edit. Like always he’s got some great lines and the usual bag of tricks. His new 700c Bueller’s and Butcher V2 seem to be holding up great for him. Keep an eye out for the Butcher V2 this summer or snag a pair of Buellers today!

[vimeo 40206362 width=”500″]

Bueller Hubs and 14mm Axles Now Available

Our 14mm axles have finally made it in! For those of you who have already ordered Butcher wheelsets your axles are on their way. For all new orders the 14mm axles will be included. With the new axles in were are also able to offer Bueller hubsets for sale. $99 gets you a pair of 36h hubs with 10mm female axles and the 14mm rear axle conversion kit. For those of you needing single hubs you can get just a rear hub for $64.50 or a front for $54.50. Don’t forget we still have 26″ and 700c Bueller wheelsets for only $199.50 and rims for $34.50

Lockedcog Quick Clip

Kris has a quick little 30 second edit he threw together with the help of Brian from Toro. Looks like it’s been raining quite a bit in Sacramento lately so what better way to stay dry than hitting some garage spots.

[vimeo 38644946 width=”500″]

New Lockedcog Edit

Things have been a bit busy here lately so posts haven’t been going up as much as usual. Kris put out a new edit a few days back.  He spent a night riding and filming a few spots around Sacramento. The days seem to be nicer than usual out there so what better way to spend it than on a bike.

Bueller… Bueller… – EighthInch Buellers Now In Stock!

It’s been a long wait for some of you but our Bueller wheelsets and rims are finally in stock. The rims are double walled and 32mm wide making them perfect for use with a wider tire. We have them available as 26″ and 700c both with 36h drilling and eyelets. A few of our riders have been testing these and they hold up great for freestyle and bike polo. These wheels can handle almost anything you throw at them.

The rims are laced to 36h sealed bearing hubs with 10mm female axles. A 14mm rear axle conversion kit will be included with each wheelset to give you all the pieces you need to mount them in a 14mm dropout. Unfortunately the 14mm conversion kits did not make it in on this order but we are having them rushed in. If you order a set now they will come set up for 10mm dropouts but we will send you the 14mm axle kit free of charge as soon as they arrive. The rims sell for $39.50 each and the wheelsets are $224.50 on Cycling Closeouts. Expect for single hubs to be available once the axle kits arrive. Here is a rundown on the specs:

Size – 26″ or 700c
Drilling – 36h w/eyelets
Width – 32mm
Depth – 24.5mm
Weight – 26in/800g    700c/900g

36h drilling
fixed/fixed hub
sealed bearing
120mm rear, 100mm front spacing
10mm female axle with bolts
14mm rear axle conversion kit (includes 14mm axle, bearings, seals, washers and bolts)

Wheelset Weight – 26in/2820g   700c/3060g

Bueller 26″ Wheel Preview

We met Jahrome out at the SF Bike Expo last month and hooked him up with a 26″ Bueller rim and hub. He was able to get it laced up over the weekend and posted a little teaser video. Check it out below and keep an eye out for more info on our 26″ Bueller wheels on Mashafix.

LockedCog Butcher V2 Bike Check

Kris posted a bike check for his V2 Butcher last week. Some prototype components will soon be added to the build so keep an eye out for updates on LockedCog. Otherwise if you want to see them up close stop by our booth at the SF Bike Expo and take a look for yourself!

Frame: Proto Butcher V2
Wheels: Proto 26ers With Bueller 14mm rear and 2 inch tires
Fork: Leader Reaper
Bars: Leader Trickstar
Stem: Eighthinch Freestyle
Cranks: Eighthinch Freestyle splined
Pedals: Eighthinch Street
Sprocket and Cog: Eighthinch 37t splined to 15t CNC cog
Chain: Eighthinch Half Link
Seat and Seatpost: Odyssey Aitken Nighwolf pivotal to Shadow Conspiracy post i believe